---
title: "ezgh lb load-balancers create"
description: "Create a load balancer."
---

> Documentation Index
> Fetch the complete documentation index at: https://docs.ezghcloud.com/llms.txt
> Use this file to discover all available pages before exploring further.

# ezgh lb load-balancers create

{/* Generated by ezgh-cli's internal/tools/clidocs from the ezgh command tree. Don't edit: change the command's help in ezgh-cli and regenerate. */}

```sh
ezgh lb load-balancers create <name> --subnet <sbn_…> [--ipv4-address <pip_…>] [--ipv6|--no-ipv6] [--description d] [--tag k=v…] [--wait] [flags]
```

Create a load balancer in a subnet: on an allocated public IPv4 address (`--ipv4-address`), on IPv6, or both. Without `--ipv6` or `--no-ipv6` it answers on IPv6 too when the subnet has a ::/0 route to the Network Gateway; `--ipv6` asks for IPv6 and needs that route, and `--no-ipv6` keeps it IPv4 only. Without `--ipv4-address` it answers on IPv6 only. The subnet needs a route to the Network Gateway for each family it answers on (0.0.0.0/0, and ::/0 for IPv6) and at least 16 free addresses. It takes minutes: `--wait` waits until it's active and prints it. Deleting it later leaves the IPv4 address allocated in the project.

Part of [`ezgh lb load-balancers`](/cli/reference/lb-load-balancers).

## Examples

```sh
ezgh lb load-balancers create storefront --subnet sbn_2m9x0a7qpe4k --ipv4-address pip_9d3f1h6j2lnr --wait
ezgh lb load-balancers create internal --subnet sbn_2m9x0a7qpe4k --ipv4-address pip_9d3f1h6j2lnr --no-ipv6
ezgh lb load-balancers create edge --subnet sbn_2m9x0a7qpe4k --ipv6
```

## Flags

| Flag | Type | Default | Description |
| --- | --- | --- | --- |
| `--description` | string |  | what it's for |
| `--ipv4-address` | string |  | its public IPv4 address (pip\_…); leave it out for IPv6 only |
| `--ipv6` | boolean |  | answer on IPv6 too (the default where the subnet has a ::/0 route to the Network Gateway) |
| `--no-ipv6` | boolean |  | answer on IPv4 only |
| `--subnet` | string |  | the subnet that holds it (sbn\_…) |
| `--tag` | string, repeatable |  | a tag, key=value; repeat for more |
| `--wait` | boolean |  | wait until it's active, and print it then |
| `--wait-timeout` | duration | `10m0s` | how long `--wait` waits |

This command also takes the [global flags](/cli/reference#global-flags).

Source: https://docs.ezghcloud.com/cli/reference/lb-load-balancers-create/index.mdx
